Equipment Description
Working principle: a cam-driven force-transmission mechanism produces intermittent motion in the equipment. The machine uses a copper-bush guided seat combined with a high-precision, high-frequency guide rod to generate the large pressing force needed to compress the battery can and cap to the dimensions required by the process, thereby achieving battery sealing. Performance features: integrated electromechanical design, PLC control, low energy consumption, low cost, high efficiency, and high precision.
Basic Configuration
| No. |
Component |
Description |
| 1 |
Cam Section (A) |
Motor-driven cam mechanism with eight copper-bush positions; touch-screen manual fine adjustment for precise pressing control. |
| 2 |
Feed Section (B) |
Extra-long conveyor device, German NEY bearings, Taiwan adjustable-speed TWT motor for smooth cell feeding. |
| 3 |
Pushing Section (C) |
Smart inductor for cell-in-place sensing; dual-axis positioning with single-cylinder U-type pusher; pre-seal, second-seal, and third-seal interlocked. |
| 4 |
Mold-Closing Section (D) |
Spring-loaded bidirectional mold seat; moving mold seat made of oil steel, heat-treated for wear resistance and precision alignment. |
| 5 |
Discharge Section (E) |
Automatic unloading mechanism; discharge and feed on the same side, allowing single-operator operation. |
| 6 |
Electrical Section (F) |
Mitsubishi electrical program with multiple inductive switches; automatic alarm on any abnormality. |
| 7 |
Key Components |
AirTAC cylinders; Mitsubishi electrical control system; upper-frame touch-screen micro-adjust control; Jiazhuo sensor; Mingwei power supply; safety protection device; wear-resistant oil-steel sealing mold. |
Technical Parameters
| No. |
Parameter |
Value |
Remarks |
| 1 |
Rated voltage |
380 V / 50 Hz |
3-phase |
| 2 |
Rated power |
4.0 kW |
|
| 3 |
Working air pressure |
5–6 kgf/cm² |
|
| 4 |
Equipment weight |
approx. 400 kg |
|
| 5 |
Efficiency |
45–55 pcs/min |
|
| 6 |
Overall dimensions (L×W×H) |
1650 × 700 × 1260 mm |
|
